http://www.abbeywoodmoving.com/
416-292-1107
1-800-565-4888

Tuesday, October 19, 2010

Moving Tips for IKEA furniture

I have just installed a very beautiful IKEA wall lamp. While browsing the store I could not help but noticed everything is sold and shipped in flat boxes. However, I have not been on a single move when the IKEA furniture is packed back into a box. To be honest, the IKEA furniture does not always make it to the other end. Its the risk we take. The problem with moving IKEA furniture is a great percentage are made from inexpensive particleboard and fastened together with dowels & a quarter turn from a single locking nut.



Particleboard breaks very easily, and can cause a critical connecting bolt to break loose. Similarly, a simple quarter turn can easily unwind with a few bumps and vibrations.

Before you move your IKEA furniture consider these few tips:



1)Lean gently on the item, if it looks sturdy enough to tip over and carry sideways without loosing its shape you might not have to disassemble. if the item sways heavily, or has to travel a great distance consider disassembling. Vibrations and bumps from moving will loosen the joints and make the piece vulnerable.



2)Place scotch/painters tape over any nuts or screws held on with less than one full 360 degree rotation. If the nut is fastened with a quarter turn, it will likely fall off and never be found.



3) If you choose to disassemble, take a picture, or find a copy of the installation manuals we always throw out. a picture is worth a 1000 words and it will save you a considerable amount of time reassembling. Mark corners with tape and mark numbers or letters to corresponding sides for easy reassembly.



4) Wrap the IKEA furniture tight with moving blankets, tape and stretch-wrap if available. this will keep the unit tight and in its intended form.



Good Luck!

6 comments:

  1. All good tips, may I offer another option for faceplates. What we do is remove the faceplate/switch plate put the screw back in the fixture then masking tape the face of the outlet/switch covering it from roller spray. This has the added benefit in older homes where all the screws are not of a universal size and speeds up putting it all back together. Your blog is fine, keep it up.

    move furniture easily

    ReplyDelete
  2. All the contents you mentioned in post is too good and can be very useful. I will keep it in mind, thanks for sharing the information keep updating, looking forward for more posts. Thanks Modular Office Furniture

    ReplyDelete
  3. These tips are really helpful. Moving furniture around the house can be done easily with the aid of magiglides. Learn what other useful things you can benefit from using these tools, click here.

    ReplyDelete
  4. Very nice and helpful information has been given in this article. I like the way you explain the things. Keep posting. Thanks.. Furniture Stores

    ReplyDelete
  5. Hello guys, excellent site, very rich in content and correctly carefully thought out, personally I found here much interesting and useful.

    furniture removalist sydney

    ReplyDelete
  6. This is part of why I hired a moving company. They knew what to do with all the different types of furniture I have and made sure it all got to the new location without so much as a scratch.

    ReplyDelete